Grippers
There are 22 products.The gripper-type fastening systems are fitted with a special rubber on the inside of the clip which locks the print inside and makes it difficult to release it. Grippers are used to assemble posters, large messages in both cardboard and plastic.
-
Gripper T adhesive with narrow base
GRIP-T-A-13It is an ideal solution for presenting posters both vertically and horizontally. Width: 13 mm. Length: 25 or 76 mm. Maximum insert size 2 mm.
-
Gripper T with narrow base non-permanent adhesive
GRIP-T-ANEquipped with non-permanent adhesive, which leaves no marks on any surface. Maximum insert thickness: 2 mm. Width: 13 mm. Length: 25 mm
-
Gripper T with non-permanent adhesive wide base
GRIP-ANEquipped with non-permanent adhesive, which leaves no marks on any surface. Maximum insert thickness: 2 mm. Width: 25 mm. Length: 25 mm
-
Super Gripper T adhesive for thick prints
GRIP-ST-AEquipped with adhesive tape. This gripper allows the insertion of thick posters. Maximum insert thickness: 4 mm. Width: 19 mm. Length: 76 mm.
-
Gripper T flexible adhesive with wide base
GRIP-TF-A-25Equipped with adhesive tape. This flexible gripper is more impact resistant and offers better stability of large messages. Maximum insert thickness: 2 mm. Width: 25 mm. Length: 25, 76 mm.
-
Flexible T-gripper with magnet, 75 mm
GRIP-TF-MFlexible, with magnetic stripe. Maximum insert thickness: 2 mm. Width: 25 mm. Length: 75 mm.
-
Small G gripper with wide base
GRIP-S-AEquipped with adhesive tape. Recommended for displaying small cardboard posters on smooth surfaces. Fixing base dimensions: 20x20 mm. Maximum insert thickness: 1 mm.
-
U-grip gripper with adhesive tape
GRIP-UAEnsures a very good grip of the poster. For presentation parallel to the mounting surface. Maximum insert thickness: 2 mm. Length: 25 mm.
-
Simple gripper for wire baskets
GRIP-SWSingle hook clamp used to hold light posters on 10 mm wire elbows. Maximum insert thickness: 2 mm.
-
Gripper L 25 mm
GRIP-LAllows the assembly of L-shaped posters. It can be provided with adhesive. Maximum insert thickness: 2 mm.
-
Large G gripper with narrow base
GRIP-SM-AEquipped with adhesive tape. It is suitable for displaying posters up to 3 mm thick. Fixing base dimensions: 60x28 mm.
-
Large G gripper with wide base
GRIP-SML-AEquipped with adhesive tape. Allows you to display double-sided posters. Maximum insert thickness: 1 mm. Fixing base dimensions: 45x45 mm.
-
Suction cup with horizontal gripper
VGHIt is mounted in front of the shelf on glass or on any smooth surface. Maximum insert thickness: up to 2 mm. It is recommended to thoroughly clean the contact surface and degrease before application for optimal adhesion.
-
Large gripper with two suction cups
E-FIX2-GRIPThe 2 suction cups allow fixing on metal or glass surfaces. Maximum insert thickness: 2 mm. It is recommended to thoroughly clean the contact surface and degrease before application for optimal adhesion.
-
Gripper X 25 mm
GRIP-XGripper X 25 mm. Allows the assembly of 4 posters at a 90 degree angle. Maximum insert thickness: 2 mm.
-
Inclined gripper with wide base
GRIP-INAllows messages to be displayed in an oblique position. Maximum insert thickness: 0.5 mm. Fixing base dimensions: 45x32 mm.
-
Magnetic T-gripper with wide base, 75 mm
GRIP-MEquipped with magnetic stripe. Maximum insert thickness: 2 mm. Width: 25 mm. Length: 75 mm.
-
Gripper T adhesive with wide base
GRIP-AThe clip is equipped with a wide adhesive tape for better stability even in the case of larger messages. Maximum insert thickness: 2 mm. Width: 28 mm. Length: 25, 76, 152 mm.
-
Suction cup with vertical gripper
VGVIt is mounted in front of the shelf on glass or on any smooth surface. Maximum insert thickness: up to 2 mm. It is recommended to thoroughly clean the contact surface and degrease before application for optimal adhesion.
-
Clamp with 2 adjustable angle grips
GRIP-J-CLRIt is equipped with a multi-angle support to allow optimization of the viewing angle. Allows messages to be displayed perpendicular to the shelf. Maximum insert thickness: 2 mm.
-
Double gripper for wire baskets
GRIP-DWClamp with 2 hooks used for signaling on wire bends. Maximum insert thickness: 2 mm. Length: 35 mm.
-
Gripper H 25 mm
GRIP-HAllows you to assemble multiple posters. It can also be provided with adhesive. Maximum insert thickness: 2 mm.
- Shelf communication
- Assembly solutions
- Price display
- Signage
- Price profiles
- Shelf merchandising
- Suspended solutions
- Product information
- Hook merchandising
- Shopfitting & Equipments
Filter by:
-
What are metal shelves for supermarket stores?
Shelves and gondolas for supermarket stores, gas stations, pharmacies are the basic equipment in equipping the...
-
Magnetic banner support
Suitable both for segmenting categories and for efficient shelf communication of brands or promotions.
-
Cross merchandising tape for 12 display faces
The ideal solution for impulse shopping. Perfect for cross-merchandising and saving shelf space.
-
The gravitational dispenser - the guarantee of perfect hygiene
The new gravity dispenser model developed, designed and improved with unique functionalities to offer probably the...
-
Shovel Dispenser - Modern and ergonomic solution
The retail industry has evolved rapidly in the last 10 years and continues on the same trend, and for this reason...