Shelf communication
There are 99 products.We provide the widest range of solutions for shelf communication: category delimitation systems, header display, clamps for displaying various shelf promotions, flag systems, shelf lighting solutions and various promo strips.
-
Perpendicular display promo clip
CLE-PR40/ELPromo clamp, fixing on 30/40 mm strips or on profiles for electronic labels Allows display of perforated communications perpendicular to the price profile or electronic label rail.
-
Shark foot with ECO magnetic sole
SHARK-ECO-MThis clip guarantees the best fixing of the advertisement on the label strips with a width of 30-40 mm. Requires perforation of the displayed message. Height: 40 mm.
-
Metal twister 75mm
TW-M1It is fixed on any surface. It bends easily in any position, making it easier to display the message at any angle. Equipped with two adhesive attachment points. Length: 75mm.
-
Clamp with 2 adjustable angle grips
GRIP-J-CLRIt is equipped with a multi-angle support to allow optimization of the viewing angle. Allows messages to be displayed perpendicular to the shelf. Maximum insert thickness: 2 mm.
-
Freeline brochure holder
CLE-BROQuick and easy fixing on the rounded profile. Used for both leaflets and product samples. For shoots formed: 1/3 A4 or A6.
-
Magnetic banner holder with open hooks
MULTIMAGFixing under the shelf, above the shelf or on the shelf poles. Two fixing angles at 0 and 90 degrees. Arm length: 250 mm. Maximum load: 500 g.
-
30 mm promo strip with rail for separators
REP-PRO-T-30Height: 30 mm Standard color: white, black. Standard lengths: 1000, 1245, 1330 mm. Other sizes or colors available on request. Available in adhesive or magnetic tape.
-
Pure magnetic line profile
PRL-M/System for displaying prices and branding on the shelf for metal, wooden or glass shelves. Transparent, black or white. Dimensions on request.
-
LED strip 60 leds / meter
LD60-5M/Roll 5 m led strip, 12 Volt power supply. Warm or cold light. Various light intensities available.
-
Flag support kit with 1 tilt position
FLAG1The set includes an adhesive support with an inclination of 60 degrees, a PVC tube 600 mm long and 17-19 mm in diameter, 550 mm long section and end element. Allows stapling of paper messages inside the tube.
-
Flashing LED with battery included
LED5-38x25Led module with double flashing adhesive, white, 5 mm diam, 38 x 25mm. Can be easily applied to various displays. Various colors available Battery life: about 90 days.
-
Magnetic header holder 2 fixing angles (90, 25 degrees)
HM9025For fixing at 90 or 25 degrees to the metal surface (eg fixing on the back panel of the shelf in order to expose a header). Equipped with ultra strong magnet. Depending on the position on which the print is fixed, it can be mounted either perpendicular to the magnetic surface or at an angle of 25 degrees without vertical (65 degrees to the magnetic...
-
Clamp for the label holder strip fixing in two points
CLE-R40Price fixing accessory or electronic label rails for Vegetable & Fruit boxes. White color.
-
Metal twister 3 adhesive points 75mm
TW-M2It bends easily in any position, making it easier to display the message at any angle. Equipped with double adhesive tape for folding message. Length: 75mm.
-
Profile pure line glass shelves
PRL-S/System for displaying prices and branding on the shelf for glass shelves 6-10 mm thick. Transparent and white. Dimensions on request.
-
Brandline 25 mm fixing above the shelf with T rail and...
BRD-STAllows 25 mm high message insert. Illuminates the communication and the face of the products on the shelf below. Various sizes available.
-
Shark foot with magnet
SHARK-MIt can be used in a vertical or horizontal position. Equipped with magnet for fixing on metal surfaces. Height: 124 mm. Maximum load: 12 kg.
-
LED strip 120 leds / meter
LD120-5M/Roll 5 m led strip, 12 Volt power supply. Warm or cold light. Various light intensities available.
-
Flag support kit with 3 tilt positions
FLAG3The set includes an adhesive support with 3 tilting positions 0 degrees / 45 degrees / 90 degrees, a PVC tube 600 mm long and 17-19 mm in diameter, 550 mm long section and end element. Allows stapling of paper messages inside the tube.
-
Label holder for Freeline 40x65 mm
LB-FRCurved label holder. Equipped with a hinge that allows easy handling of the product on the lower shelf. Dimensions (height x width): 31x95, 40x50, 40x65, 40x75, 40x100, 40x135, 80x120, 80x150, 80x210, 80x300 mm.
-
Promo strip 30 mm without separating rail
REP-PRO-30Height: 30 mm Standard color: white, black. Standard lengths: 1000, 1245, 1330 mm. Other sizes or colors available on request. Available in adhesive or magnetic tape.
-
Magnetic banner holder, 250 mm arm, folding
MULTIMAG-HMagnetic L-type bracket with adjustable tilt angle. The strong magnet allows the bracket to be fixed under the shelf. Length: 250mm, Material: Plastic body, aluminum arm. Equipped with 2 movable plastic hooks for displaying the print or pocket.
-
Magnetic header holder fixing 25 degrees
HM25For fixing at 25 degrees to the metal surface (eg fixing on the back panel of the shelf in order to expose a header). Allows optimal visibility Easy to store, install and deliver. For 3 mm inserts. Maximum recommended height for panels: 400 mm
-
75mm wide metal twister
TW-M3Deformable aluminum twister. It can tilt to the desired angle and keep this orientation. Recommended for attaching large size / weight posters. Length: 75 mm.
-
30mm promo strip with led strip channel
REP-PROL-30Height: 30 mm. Standard color: transparent. Standard lengths: 1000, 1250, 1330mm. Possibility of LED introduction in the LED channel to illuminate the communication and the products on the bottom shelf.
-
Power cable with male plug
CON-MFor the LED strip. Cable length on request. Ideal solution for connecting various illuminated liners to the power supply.
-
Inclined flag support for tubes diameter 5-7 mm
FLAG-S6Equipped with double sponge adhesive. Allows the attachment of tubes with a diameter of 5-7 mm at an angle of 60 degrees.
-
Pure Line profile label holder
PRL-LB/Compatible with Pure Line profile. Allows 30 mm high insert. Wide demand. Color: transparent.
-
Brandline 25 mm fixing above the shelf with T rail
BRD-TAllows 25 mm high message insert. Illuminates the communication and the face of the products on the shelf below. Various sizes available.
-
Magnetic banner holder with folding arm
MULTIMAG+It can be used on the shelf, at the bottom of the shelf or on walls and metal poles. With folding mechanism, easy to use, to position the arm in any position from 0 to 180Â °. Arm length: 310 mm. Maximum load: 1000 g
-
Magnetic header holder fixing 90 degrees with double...
HM90AFor fixing perpendicular to the metal surface (eg fixing on a shelf in order to expose a header). Magnetic console: -magnetic base -can be used for presenting panels between 1 and 3 mm thick For widths up to 1000 mm: 2 supports For widths up to 1330 mm: 3 supports Maximum recommended viewing height: 300 mm
-
Promo clamp for 40mm strip
CLEM-PROM/40Fixing accessory for price boxes on wire baskets, tubes, etc. White color. For tubes with a diameter of 12 or 16 mm. Material: POM.
-
Twister PVC 75mm
TW-PTransparent PVC twister. Recommended for small size / weight posters. Length: 75 mm.
-
Telescopic poster support arm
TEL-ARMAvailable with accessories for fixing in perforated wall, on power bars, in gondola legs or in Slatwall type wall. Please mention the desired fixing when ordering. Length: 550 - 900 mm.
-
Brochure holder for Pure Line
PRL-SB/A4Compatible with Pure Line profile. For displaying presentation brochures next to the product. Dimensions: A4.
-
Vertical flag support for tubes diameter 5-7 mm
FLAG-S5Allows the horizontal or vertical fixing of tubes with a diameter of 5-7 mm. Equipped with adhesive tape.
-
Clema Freeline
CLE-FRSupport-message system with clamp type clamping mechanism for fixing on the Freeline profile. For prints with 1 perforation.
-
1 to 4 splitter cable
CON-F/M-1:4Splitter 1 mama - 4 tata. Input / output lengths can be configured according to your project.
-
Magnetic header support for parallel fixing
HM0For parallel mounting on the metal surface (eg mounting on the back panel of the shelf in order to expose a header). Easy to store, install and deliver. For 3 mm inserts. Maximum recommended height for panels: 400 mm
-
Promo clamp for 50 mm strip
CLEM-PROM/50Fixing accessory for price boxes on wire baskets, tubes, etc. White color. For tubes with a diameter of 12 or 16 mm. Material: POM.
-
Adhesive metallic twister without traces 75mm
TW-M-CLEANEquipped with a special adhesive that leaves no marks on the grip surface, after removal. Length: 75mm.
-
End element for tubes diameter 5-7 mm
FLAG-T5-ENDGives an elegant niche for tubes 5-7 mm. It has the role of locking the poster in the sectioned tube
-
Magic Divider lighting divider
SEP-MDIt consists of a clamp that attaches to the back of normal separators. You can set the light shade using various color filters.
-
40 mm adhesive promo strip
REP-PRO-T-40Height: 40 mm. Standard color: white. Standard lengths: 1000, 1245, 1330 mm. Other sizes or colors available on request. Available in adhesive or magnetic tape mounting.
-
Power cord with mother plug
CON-FFor the LED strip. Optional with clamp. Power cord length according to specifications.
-
Pure Line tester support
PRL-TESTER/75X75Compatible with Pure Line profile. For presentation of testers or samples on the shelf next to the product. Dimensions: 75x75 mm.
-
Shark leg with suction cup
SHARK-VIt can be used in a vertical or horizontal position. Equipped with suction cup for fixing on glass or metal surfaces. Height: 124 mm.
-
Freeline coupon clip
CLE-FR-CUP1It is fixed on the Free Line rail; the viewing angle can be adjusted depending on the inclination of the shelf.
- Shelf communication
- Assembly solutions
- Price display
- Signage
- Price profiles
- Shelf merchandising
- Suspended solutions
- Product information
- Hook merchandising
- Shopfitting & Equipments
Filter by:
-
What are metal shelves for supermarket stores?
Shelves and gondolas for supermarket stores, gas stations, pharmacies are the basic equipment in equipping the...
-
Magnetic banner support
Suitable both for segmenting categories and for efficient shelf communication of brands or promotions.
-
Cross merchandising tape for 12 display faces
The ideal solution for impulse shopping. Perfect for cross-merchandising and saving shelf space.
-
The gravitational dispenser - the guarantee of perfect hygiene
The new gravity dispenser model developed, designed and improved with unique functionalities to offer probably the...
-
Shovel Dispenser - Modern and ergonomic solution
The retail industry has evolved rapidly in the last 10 years and continues on the same trend, and for this reason...